{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7 11 mm
Article no.: 164000 11
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 11 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 41 mm | |
| Overhang L1 | 108 mm | |
| Overall length L | 175 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.15 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 11 | |
| EAN / GTIN | 4045197091871 | |
| Manufacturer number | 164000 11 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Ausführung:
Gerade Zähnezahl mit ungleichem Abstand der Zähne. Die Bohrung wird absolut rund und rattermarkenfrei. Die Rundschliff-Fase am zylindrischen Schneidenteil glättet die Bohrung und führt die Reibahle. Aufnahmeschaft konisch.
Reibahlen fertig geschliffen für Passung H7.
Reibahlen fertig geschliffen für Passung H7.
Verwendung:
Zum Reiben durchgehender Bohrungen, da die Späne in Schneidrichtung abgeführt werden. Durch den kurzen Anschnitt auch für Grundlöcher geeignet.
Hinweis:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer H7 11 mm |
||||||
| Number of cutting edges Z | 6 | 6 | 6 | 6 | 6 | 6 |
| Overhang L1 | 108 | 101 | 101 | 101 | 98 | 108 |
| Coating | uncoated | uncoated | uncoated | uncoated | TiN | uncoated |
| Colour ring | without | green | without | without | without | without |
| Overall length L | 175 | 142 | 142 | 142 | 142 | 175 |
| Shank | Morse taper | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Plain shank with h9 | Morse taper |
| Flute length Lc | 41 | 41 | 41 | 41 | 41 | 41 |