{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer Configurable 32 mm
Article no.: 160200 32
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 32 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| ⌀ range | 30.201 mm - 32.200 mm | |
| Flute length Lc | 133 mm | |
| Overhang L1 | 168 mm | |
| Overall length L | 265 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 24 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160200 32 | |
| EAN / GTIN | 4045197927521 | |
| Manufacturer number | 160200 32 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
|
Hand reamer Configurable 32 mm |
|||
| Number of cutting edges Z | 10 | 5 | 10 |
| Coating | uncoated | uncoated | uncoated |
| Overall length L | 265 | 354 | 317 |
| Flute length Lc | 133 | 210 | 77 |
| Tool material | HSS | HSS | HSS E |
| Helix angle | 7-8 | 25 | 7-8 |
| Application for type of drilling | for through holes | for through holes | for through hole |