{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7, Nominal ⌀ DC: 2,5mm
Article no.: 160150 2,5
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 2.5 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 29 mm | |
| Overhang L1 | 37 mm | |
| Overall length L | 58 mm | |
| Number of cutting edges Z | 4 | |
| Shank square □ | 2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 2,5 | |
| EAN / GTIN | 4045197937117 | |
| Manufacturer number | 160150 2,5 |
Application Table
N
P
P
P
Description
Ausführung:
Mit Linksspirale 7 − 8° und langem Anschnitt über 1/5 der Schneidenlänge. Gerade Zähnezahl mit ungleicher Teilung für runde und rattermarkenfreie Bohrung. Die Rundschliff-Fase am zylindrischen Schneidenteil glättet die Bohrung und führt die Reibahle.
Verwendung:
Für Durchgangsbohrungen (nicht für Grundlöcher). Auch für unterbrochene Bohrungen gut geeignet.
Hinweis:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Hand reamer H7, Nominal ⌀ DC: 2,5mm |
on request
Available in 3-4 weeks
0 pieces in stock
34,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 4 | 4 |
| Overhang L1 | 37 mm | 39 mm |
| Standard | DIN 206 B | DIN 206 B |
| Tool material | HSS | HSS |
| Helix angle | 7-8 degrees | 7-8 Grad |
| Application for type of drilling | for through hole | bei Durchgangsloch |
| Type of product | Phillips bit | Reibahle |