{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Gewindegröße | M12×1 | |
Coating | TiAlN | |
Thread type | MF; MF-LH | |
Flank angle | 60 degrees | |
Tool material | Solid carbide | |
Thread standard | DIN 13 | |
Shank | DIN 6535 HA with h6 | |
Gewindesteigung | 1 mm | |
Nenn-⌀ DC | 7,95 mm | |
Schneidenlänge Lc | 26,5 mm | |
Schaftlänge Ls | 40 mm | |
Gesamtlänge L | 75 mm | |
Schaft-⌀ Ds | 10 mm | |
Innenkühlung | ja | |
Zähnezahl Z | 4 | |
Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
Vorschub fz in Stahl < 900 N/mm2 | 0,04 mm | |
Anzahl Spannuten | 4 | |
Colour ring | green | |
Internal/external application | Internal | |
Gewindetiefe | 26,5 mm | |
Type of product | thread milling cutter |
Article number | 139680 12X1 | |
EAN / GTIN | 4045197778284 | |
Manufacturer number | 139680 12X1 |
This article |
Recommendations |
|||
---|---|---|---|---|
Plain shank thread mill 2×D, TiAlN, MF: 12X1 |
on request
Not available
0 pieces in stock
278,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
388.00 €
289,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
378.00 €
231,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Flank angle | 60 degrees | 60 Grad | 60 Grad | 60 Grad |
Gewindegröße | M12×1 | M12×1 | M12×1 | M12×1 |
Thread standard | DIN 13 | DIN 13 | DIN 13 | DIN 13 |
Nenn-⌀ DC | 7,95 mm | 9,95 mm | 10,4 mm | 10,4 mm |
Tool material | Solid carbide | VHM | VHM | VHM |
Gewindetiefe | 26,5 mm | 24,5 mm | 30,5 mm | 24,5 mm |
Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | bis 2×D bei Grundloch; bis 2×D bei Durchgangsloch | bis 2,5×D bei Grundloch; bis 2,5×D bei Durchgangsloch | bis 2×D bei Grundloch; bis 2×D bei Durchgangsloch |