{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E M20
Article no.: 132640 M20
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Swarf evacuation in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E
- Standard: DIN 376
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M20 | |
| Coating | vaporised | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E | |
| Standard | DIN 376 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2 6H | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 2.5 mm | |
| Overall length L | 140 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank square □ | 12 mm | |
| Tapping hole ⌀ | 17.5 mm | |
| Thread ⌀ | 20 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Number of cutting edges Z | 4 | |
| Thread depth | 60 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132640 M20 | |
| EAN / GTIN | 4045197072412 | |
| Manufacturer number | 132640 M20 |
Application Table
N
13
P
15
P
15
P
15
P
6
M
6
N
13
Description
Version:
Guide section with oil grooves, but without chip flutes.
Size M1.7, M2.3, and M2.6 with old DIN profile.
With spiral point.
Size M1.7, M2.3, and M2.6 with old DIN profile.
With spiral point.
Tolerance class: ISO 2 6H
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
|
Machine tap HSS-E M20 |
|||
| Thread pitch | 2.5 | 2.5 | 2.5 |
| Standard | DIN 376 | DIN 376 | DIN 376 |
| Shank | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 |
| Shank square □ | 12 | 12 | 12 |
| Tool material | HSS E | HSS E | HSS E |
| Application for type of drilling | up to 3×D for through holes | up to 2×D for through holes | up to 3×D for through holes |
| Type of product | Tap | Tap | Tap |