{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap, vaporised, M: M12
Article no.: 131100 M12
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
The spiral point evacuates the swarf in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E
- Standard: DIN 376
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M12 | |
| Coating | vaporised | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E | |
| Standard | DIN 376 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2 6H | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.75 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 9 mm | |
| Shank square □ | 7 mm | |
| Tapping hole ⌀ | 10.2 mm | |
| Thread ⌀ | 12 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | yellow | |
| Number of cutting edges Z | 3 | |
| Thread depth | 36 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 131100 M12 | |
| EAN / GTIN | 4045197068514 | |
| Manufacturer number | 131100 M12 |
Application Table
N
13
N
13
P
15
N
13
Description
Version:
Strong spiral point.
Guide section with oil grooves, but without chip flutes. Particularly strong, optimal self-guidance with no recutting on reversal.
Sizes M2.3 and M2.6 to the old DIN profile.
Guide section with oil grooves, but without chip flutes. Particularly strong, optimal self-guidance with no recutting on reversal.
Sizes M2.3 and M2.6 to the old DIN profile.
Version - image:
Oil groove
Guide thread
Lead-in
Spiral point
Guide thread
Lead-in
Spiral point
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Machine tap, vaporised, M: M12 |
|||||
| Number of clamping slots | 3 | 3 | 4 | 3 | 4 |
| Coating | vaporised | vaporised | vaporised | vaporised | TiN |
| Colour ring | yellow | blue | green | green | green |
| Thread ⌀ | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Through-coolant | no | no | no | no | no |
| Thread depth | 36 mm | 36 mm | 36 mm | 36 mm | 36 mm |
| Application for type of drilling | up to 3×D for through holes | up to 3×D for through holes | up to 3×D for through holes | up to 3×D for through holes | up to 3×D for through holes |