{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide high performance drill Weldon shank DIN 6535 HB 3,5 mm
Article no.: 123307 3,5
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 12×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 3.5 mm | |
| Coating | TiN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 12×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 48.8 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Pilot drill required | yes, pilot drill | |
| Flute length Lc | 54 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 1100 N/mm2 | 0.1 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 123307 3,5 | |
| EAN / GTIN | 4045197449887 | |
| Manufacturer number | 123307 3,5 |
Application Table
N
175
N
135
P
105
P
85
P
75
P
45
P
30
M
35
M
30
K
65
Description
Version:
Strong core and special point geometry ensure the cutting chisel edges maintain high self-centring accuracy.
Straight cutting edges with slight edge hone and a special flute profile produce short chips.
Straight cutting edges with slight edge hone and a special flute profile produce short chips.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Solid carbide high performance drill Weldon shank DIN 6535 HB 3,5 mm |
|||||
| Version | 12×D | 12×D | 12×D | 12×D | 12×D |
| Colour ring | green | blue | green | yellow | green |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | Yes, with 25 bar | yes, to 25 bar |
| Point angle | 135 degrees | 135 degrees | 135 degrees | 135 degrees | 135 degrees |
| Tolerance nominal ⌀ | h7 | m6 | h7 | h7 | h7 |
| Flute length Lc | 54 mm | 54 mm | 54 mm | 54 mm | 54 mm |
| Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |