{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC m6: 3/8mm
Article no.: 123010 3/8
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Tolerance nominal ⌀: m6
- Number of cutting edges Z: 2
Product details
Technical Data
| Inch nominal ⌀ corresponds to | 9.53 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Tolerance nominal ⌀ | m6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 80.705 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 95 mm | |
| Overall length L | 142 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in stainless steel > 900 N/mm2 | 0.15 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identification & Classification
| Article number |
123010 3/8
Copy |
|
| EAN / GTIN |
4062406121112
Copy |
|
| Manufacturer number |
123010 3/8
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
75
suitable for / [m/min]
P
ISO code:
70
suitable for / [m/min]
P
ISO code:
55
suitable for / [m/min]
P
ISO code:
32
suitable for / [m/min]
M
ISO code:
70
suitable for / [m/min]
M
ISO code:
60
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Note:
Flute length LC = L2 + 1.5 × DC.