{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill, plain shank DIN 6535 HA 4,9 mm
Article no.: 122808 4,9
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Type: W
- Tolerance nominal ⌀: h7
Product details
Technical Data
| Nominal ⌀ DC | 4.9 mm | |
| Coating | DLC | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Type | W | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 49.7 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 57 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank tolerance | h6 | |
| Feed f in aluminium short-chipping | 0.35 mm/rev. | |
| Colour ring | yellow | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122808 4,9 | |
| EAN / GTIN | 4045197753830 | |
| Manufacturer number | 122808 4,9 |
Application Table
N
325
N
360
N
315
N
135
N
110
N
80
N
70
N
60
N
70
N
140
N
160
N
70
N
70
Description
Version:
DLC coating sp2 of the latest generation with low coefficient of friction results in outstanding chip clearance. For high-performance milling of aluminium materials. High roundness and alignment accuracy of the deep hole, thanks to 6 guide chamfers.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
|
Solid carbide HPC drill, plain shank DIN 6535 HA 4,9 mm |
||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
| Version | 8×D | 8×D | 12×D | 8×D | 12×D | 8×D |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, to 25 bar | yes, with 25 bar |
| Tool material | solid carbide | Solid carbide | solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Machining strategy | HPC | HPC | HPC | HPC | HPC | HPC |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 | 6 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |