{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlSiN, ⌀ DC m7: 10mm
Article no.: 122681 10
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 10 mm | |
| Coating | TiAlSiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 46 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 61 mm | |
| Overall length L | 103 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in titanium > 850 N/mm2 | 0.13 mm/rev. | |
| Colour ring | pink | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122681 10 | |
| EAN / GTIN | 4062406792190 | |
| Manufacturer number | 122681 10 |
Application Table
S
45
S
35
Description
Version:
Specially for machining titanium-based and nickel-based alloys. With wear-resistant, ultra-smooth TiAlSiN high-performance coating for a long tool life combined with optimum bore quality and very low burr formation.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlSiN, ⌀ DC m7: 10mm |
|||
| Number of cutting edges Z | 2 | 2 | 2 |
| Coating | TiAlSiN | TiAlN | AlTiN |
| Colour ring | pink | blue | blue |
| Standard | DIN 6537 | DIN 6537 | DIN 6537 |
| Flute length Lc | 61 mm | 61 mm | 61 mm |
| recommended maximum drilling depth L2 | 46 mm | 46 mm | 46 mm |
| Type of product | Jobber drill | Jobber drill | Twist Drill |