{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide high performance drill plain shank DIN 6535 HA 2,2
Article no.: 122630 2,2
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 2.2 mm | |
| Coating | TiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 17.7 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Semi-Standard | yes | |
| Flute length Lc | 21 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 4 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 900 N/mm2 | 0.08 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122630 2,2 | |
| EAN / GTIN | 4045197263063 | |
| Manufacturer number | 122630 2,2 |
Application Table
N
240
P
110
P
90
P
80
P
65
P
30
M
35
M
30
S
30
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry.
Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Solid carbide high performance drill plain shank DIN 6535 HA 2,2 |
||||
| Semi-Standard | yes | yes | yes | yes |
| Coating | TiN | TiN | TiN | TiAlN |
| Colour ring | green | without | green | green |
| Through-coolant | yes, with 25 bar | no | yes, with 25 bar | no |
| Standard | DIN 6537 | DIN 6537 K | DIN 6537 K | DIN 6537 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Shank ⌀ Ds | 4 | 4 | 4 | 4 |