{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 122471 6,2
Solid carbide HPC drill Weldon shank DIN 6535 HB 6,2 mm
Article no.: 122445 6,2
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 6.2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 24.7 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 34 mm | |
| Overall length L | 79 mm | |
| Shank ⌀ Ds | 8 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 1100 N/mm2 | 0.2 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122445 6,2 | |
| Manufacturer number | 122445 6,2 |
Application Table
P
90
P
80
P
70
P
65
P
35
S
35
K
70
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Convex cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Solid carbide HPC drill Weldon shank DIN 6535 HB 6,2 mm |
|||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 |
| Version | 4×D | 4×D | 4×D | 4×D | 4×D |
| Standard | DIN 6537 K | DIN 6537 K | DIN 6537 K | DIN 6537 K | DIN 6537 K |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Point angle | 140 degrees | 140 degrees | 140 degrees | 140 degrees | 140 degrees |
| Shank ⌀ Ds | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| recommended maximum drilling depth L2 | 24.7 mm | 24.7 mm | 24.7 mm | 24.7 mm | 24.7 mm |