{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill HSS-E VA 28 mm
Article no.: 116360 28
Article code:
- Tool material: HSS E
- Standard: DIN 345
- Type: INOX
- Tolerance nominal ⌀: h8
- Point angle: 135
Product details
Technical Data
| Nominal ⌀ DC | 28 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 345 | |
| Type | INOX | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 135 degrees | |
| Helix angle | 35-40 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 128 mm | |
| Flute length Lc | 170 mm | |
| Overall length L | 291 mm | |
| Morse taper MT size | 3 | |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116360 28 | |
| EAN / GTIN | 4045197032270 | |
| Manufacturer number | 116360 28 |
Application Table
P
40
P
30
P
25
P
10
M
12
S
5
K
25
N
80
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Jobber drill HSS-E VA 28 mm |
|||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 3 |
| Standard | DIN 345 | DIN 345 | DIN 345 | DIN 341 | DIN 343 |
| Shank | Morse taper | Morse taper | Morse taper | Morse taper | Morse taper |
| Flute length Lc | 170 | 170 | 170 | 222 | 170 |
| Feed f in steel < 750 N/mm2 | 0.25 | 0.25 | 0.25 | 0.25 | 0.26 |
| recommended maximum drilling depth L2 | 128 | 128 | 128 | 180 | 128 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |