{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS jobber drill N, uncoated, ⌀ DC h8: 17mm
Article no.: 116320 17
Article code:
- Tool material: HSS
- Standard: DIN 345
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 17 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 345 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Helix angle | 20-30 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 99.5 mm | |
| Flute length Lc | 125 mm | |
| Overall length L | 223 mm | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116320 17 | |
| EAN / GTIN | 4045197029546 | |
| Manufacturer number | 116320 17 |
Application Table
P
40
P
30
P
25
K
25
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
HSS jobber drill N, uncoated, ⌀ DC h8: 17mm |
||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall length L | 223 mm | 184 mm | 223 mm | 257 mm | 119 mm | 184 mm |
| Through-coolant | no | no | no | no | no | no |
| Tool material | HSS | HSS | HSS | HSS | HSS | HSS |
| Type | N | N | N | N | N | N |
| Flute length Lc | 125 mm | 125 mm | 125 mm | 159 mm | 60 mm | 125 mm |
| recommended maximum drilling depth L2 | 99.5 mm | 99.5 mm | 99.5 mm | 133.5 mm | 34.5 mm | 99.5 mm |