{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Deep hole drill HSS-E 2,5 mm
Article no.: 116063 2,5
Article code:
- Tool material: HSS E
- Standard: DIN 340
- Type: FS
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 2.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS E | |
| Standard | DIN 340 | |
| Type | FS | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 38 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 58.3 mm | |
| Flute length Lc | 62 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 2.5 mm | |
| Feed f in steel < 750 N/mm2 | 0.03 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116063 2,5 | |
| EAN / GTIN | 4045197871077 | |
| Manufacturer number | 116063 2,5 |
Application Table
N
87
N
56
N
50
P
31
P
23
P
20
P
12
S
6
K
31
Description
Version:
Significantly strengthened core without taper.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
With TiAlN coating for long tool lives.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
With TiAlN coating for long tool lives.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Deep hole drill HSS-E 2,5 mm |
||||
| Coating | TiAlN | uncoated | uncoated | uncoated |
| Colour ring | without | yellow | without | blue |
| Overall length L | 95 mm | 95 mm | 95 mm | 95 mm |
| Standard | DIN 340 | DIN 340 | DIN 340 | DIN 340 |
| Point angle | 130 degrees | 130 degrees | 130 degrees | 130 degrees |
| Flute length Lc | 62 mm | 62 mm | 62 mm | 62 mm |
| Shank ⌀ Ds | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm |