{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill set HSS No. 114000 as refill set 1-10,5
Article no.: 115020 1-10,5
Article code:
- Tool material: HSS
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
- Shank: Plain shank
Product details
Technical Data
| Drill range | 1 mm - 10.5 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Number of drills | 24 | |
| Tapping hole ⌀ | 3.3; 4.2; 6.8; 10.2 mm | |
| Incremental steps of drills | 0.5 mm | |
| with case | no | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 115020 1-10,5 | |
| EAN / GTIN | 4045197024121 | |
| Manufacturer number | 115020 1-10,5 |
Description
Version:
Composed of jobber drills DIN 338.
Additionally with intermediate sizes for tapping drill holes ⌀ 3.3 / 4.2 / 6.8 / 10.2.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Jobber drill set HSS No. 114000 as refill set 1-10,5 |
|||
| Number of drills | 24 | 24 | 24 |
| Number of cutting edges Z | 2 | 2 | 2 |
| Coating | uncoated | uncoated | uncoated |
| Incremental steps of drills | 0.5 | 0.5 | 0.5 |
| Colour ring | without | without | without |
| Through-coolant | no | no | no |
| with case | no | yes | no |