{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS-Co8 jobber drill, TiAlN, ⌀ DC h8: 12,5mm
Article no.: 114550 12,5
Article code:
- Tool material: HSS Co 8
- Standard: DIN 338
- Tolerance nominal ⌀: h8
- Point angle: 135
- Helix angle: 35
Offers
Product details
Technical Data
| Nominal ⌀ DC | 12.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 338 | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 135 degrees | |
| Helix angle | 35 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 82.3 mm | |
| Flute length Lc | 101 mm | |
| Overall length L | 151 mm | |
| Shank ⌀ Ds | 12.5 mm | |
| Feed f in stainless steel > 900 N/mm2 | 0.13 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114550 12,5 | |
| EAN / GTIN | 4045197021601 | |
| Manufacturer number | 114550 12,5 |
Application Table
P
37
P
31
P
12
P
10
M
20
M
15
S
6
Description
Version:
Extremely high heat resistance,very robust due to strong core.
With point geometry shape C.
With point geometry shape C.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
HSS-Co8 jobber drill, TiAlN, ⌀ DC h8: 12,5mm |
|||||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | TiAlN | uncoated | uncoated | uncoated | uncoated | TiAlN | uncoated | TiAlN | TiAlN |
| Colour ring | blue | yellow | red | without | without | blue | without | green | green |
| Through-coolant | no | no | no | no | no | no | no | no | no |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank | Plain shank | Plain shank |
| Tool material | HSS Co 8 | HSS | HSS E | HSS E | HSS E | HSS E | HSS E | HSS E | HSS E PM |
| recommended maximum drilling depth L2 | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm | 82.3 mm |