{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill with 3 clamping faces HSS-E 15,5 mm
Article no.: 114001 15,5
Article code:
- Tool material: HSS E
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 15.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Shank | Three drive flats shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 96.8 mm | |
| Flute length Lc | 120 mm | |
| Overall length L | 178 mm | |
| Shank ⌀ Ds | 9.5 mm | |
| Feed f in steel < 900 N/mm2 | 0.16 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114001 15,5 | |
| EAN / GTIN | 4045197750167 | |
| Manufacturer number | 114001 15,5 |
Application Table
N
70
N
45
N
40
P
40
P
30
P
25
P
10
P
8
M
12
M
8
K
25
N
80
Description
Version:
Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Shank ⌀ 9.5 mm.
Three drive flats on the shank for use in a 3-jaw chuck.
Three drive flats on the shank for use in a 3-jaw chuck.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Jobber drill with 3 clamping faces HSS-E 15,5 mm |
||||
| Overall length L | 178 | 115 | 115 | 111 |
| Through-coolant | no | no | no | no |
| Tool material | HSS E | HSS E | HSS E | HSS E |
| Tolerance nominal ⌀ | h8 | h8 | h8 | h8 |
| Type | N | N | N | N |
| recommended maximum drilling depth L2 | 96.8 | 34.8 | 34.8 | 32.8 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill |