{{ name }}
Cikkszám {{ combinedCodeWithHighlight }}
Cikkszám:
EAN / GTIN:
Gyártó száma:
POLICAP csiszolóhüvely PCH korund Ø 16x20x85 mm A60 univerzális használatra
Cikkszám: 4007220151419
Cikkszám:
Kérjük, vegye figyelembe a szállítási időt és a korlátozott tanácsadást:
Ezt a terméket közvetlenül a gyártótól rendeljük meg Önnek, mivel nem része a fő kínálatunknak, és nem tartjuk raktáron.
InfoTermékadatok
Technikai adatok
| Termék fajtája | Csiszológyűrű |
Azonosító számok és osztályozások
| Cikkszám | 4007220151419 | |
| EAN / GTIN | 4007220151419 | |
| Gyártó száma | 42330162 |
Leírás
Description:
POLICAP abrasive spiral bands with a conical shape. POLICAP tools have a seamless design and the entire tool surface can be used. For general use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and mould-making and for corresponding repair works. Also suitable for working on plastics, wood and fillers in model crafting.
Feature:
- RPM, optimum: 12000 RPM
- Abrasive: Aluminium oxide A
- Dia. external, small: 16 mm
- Dia. external, metric: 20 mm
- Grit size: 60
- Height: 85 mm
Advantage:
- Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
- Easy tool change.
Application:
- Recommendations for use: To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach. For the best results, use at a recommended cutting speed of 10-20 m/s.
- Applications: Step-by-step fine grinding; Leveling; Surface work
- Drive types: Flexible shaft drive; Straight grinder
Material:
- Materials that can be worked:
- Cast steel
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast steel; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
Note:
- The maximum permitted peripheral speed is 25 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.