{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
Povlačni vijak 90 ° zabrtvljen 40
Artikl br.: 308790 40
Šifra artikla:
- norma steznog vijka: MAS 403
Pojedinosti o proizvodu
Tehnički podaci
| prikladno za strmi konus | 40 | |
| Svojstvo provrta | bez provrta | |
| norma steznog vijka | MAS 403 | |
| ⌀ vijenca D | 23 mm | |
| ⌀ glave d1 | 15 mm | |
| Ukupna duljina | 60 mm | |
| L1 | 35 mm | |
| Navoj M | M16 | |
| maksimalni pritezni moment | 50 Nm | |
| prikladno za strmi konus s kodiranom bojom | SK 40 | |
| Širina ključa | 19 mm | |
| Vrsta proizvoda | stezni vijak |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 308790 40 | |
| EAN / GTIN | 4045197377876 | |
| Broj proizvođača | 308790 40 |
Opis
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.