{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
Povlačni vijak Mori-Seiki, zabrtvljen, oblik A ( L1 = 29 mm) 40
Artikl br.: 308630 40
Šifra artikla:
- norma steznog vijka: ISO 7388-3
Pojedinosti o proizvodu
Tehnički podaci
| prikladno za strmi konus | 40 | |
| Svojstvo provrta | s provrtom ⌀ 7 mm | |
| norma steznog vijka | ISO 7388-3 | |
| ⌀ vijenca D | 23 mm | |
| ⌀ glave d1 | 19 mm | |
| Ukupna duljina | 54 mm | |
| L1 | 29 mm | |
| Navoj M | M16 | |
| Kut A | 15 stupanj | |
| maksimalni pritezni moment | 50 Nm | |
| prikladno za strmi konus s kodiranom bojom | SK 40 | |
| Širina ključa | 19 mm | |
| Vrsta proizvoda | stezni vijak |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 308630 40 | |
| EAN / GTIN | 4045197485915 | |
| Broj proizvođača | 308630 40 |
Opis
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.