{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
Nastavak za izradu utora bez tolerancije D10, TiN, za širinu utora m: 5mm
Artikl br.: 290376 5
Šifra artikla:
Pojedinosti o proizvodu
Tehnički podaci
| za širinu utora m | 5 mm | |
| Prevlaka | TiN | |
| za precizan dosjed | D10 | |
| Širina oštrice w | 5,078 mm | |
| Dubina utora t | 3 mm | |
| Debljina oštrice b | 7 mm | |
| Rezni materijal | HSS | |
| Vrsta proizvoda | Alat za oblikovanje utora i profila |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 290376 5 | |
| EAN / GTIN | 4045197881854 | |
| Broj proizvođača | 290376 5 |
Tablica aplikacija
N
N
N
P
P
P
P
P
M
M
S
K
N
N
Opis
Version:
With TiN coating.
Suitable for regrinding.
Suitable for regrinding.
Application:
For producing slots according to DIN 6885, DIN 138 and factory standards.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
Note:
- Special sizes (slot widths) available on request.
- Detailed application values can be found in our application ToolScout.
From slot width 16 mm it is essential to perform two passes. The first pass must be performed for approx. half the slot width (e.g. 10 mm for a desired slot width of 18 mm).