{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
HiPer-Drill tijelo svrdla 14 mm
Artikl br.: 231605 14
Šifra artikla:
- Version: 3×D
- Shank: ISO 9766
- Use for drilling: limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
- Through-coolant: yes
Pojedinosti o proizvodu
Tehnički podaci
| Version | 3×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
| Through-coolant | yes | |
| Type of product | Indexable drill |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 231605 14 | |
| EAN / GTIN | 4045197602749 | |
| Broj proizvođača | 231605 14 |
Opis
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.