Version:
Lighting set for
compartmentalised lighting of the interior of the cabinet. The lamps are installed underneath the shelf and connected via the power supply rail. Sets are tailored to suit our fitted GridLine cabinets and may be installed only in them.
Extended sets for lighting individual compartments of the interior of the cabinet.
Complete sets contain all components for installation of internal lighting within a GridLine cabinet. They contain LED lights in 2 lengths, 570 mm and 870 mm. Plug connectors are protected against polarity reversal. The power consumption depends on the number of LED lamps in the set.
Lamps: With 30° beam angle for non-dazzling lighting. Integral magnets for free positioning in the interior of the cabinet. Rated voltage 24 V/DC, light colour approx. 6000 K, CRI 80, energy class A+.
LED lamps, length 870 mm: Power consumption 8.5 W; illumination 437 lm.
LED lamps, length 570 mm: Power consumption 5.5 W; illumination 676 lm.
Power supply unit: Designed especially for LED and lighting applications. Protected against short circuits, overload, overvoltage and overheating (auto-recovery). Input industrial plug No.
928491 size 3 fitted.
Input voltage 90 – 305 V/AC; output voltage 24 V/DC; output current 2.5 A; power 60 W; IP67.
Switch: When the door is opened, the lighting is switched on automatically. Ready wired unit for easy installation.
Conductor rail: Intelligent cable management enables you to install the lamps at the desired height. Installation via integrated magnetic strip. Turning connectors are labelled. Not for sets No.
940501.
Cabling: all required connecting cables between the individual components. Connecting cable with German Schuko plug No.
928640 size DE/2. The number and type of cables varies according to the set.
The lighting set incorporates built-in LED lamps, which cannot be exchanged. The operating unit (mains adapter and cable) can be replaced by the end user.
Fitted with:
Number of lamps 870 mm: 8
Supplied with:
LED lamps, switched-mode power supply, power supply rail, switch, cabling.
Note:
- A maximum of 6 lamps, length 870 mm or 9 lamps, length 570 mm can be connected to a single power supply unit.
- The system is not dimmable.
- All sets are fitted with a German SchuKo plug. For other countries please order the appropriate connecting cable No. 928640 separately.
- The switch cannot be fitted in cabinets of width 20G.
- Not suitable for roller shutter cabinets.
Warning:
Intended use- LED lighting for installation in GridLine sliding-door cabinets underneath storage shelves and underneath the tops of cabinets.
- An optional switch available for installation; this switches the lighting on when the cabinet is opened.
- The LEDs are not replaceable.
- For work in industrial environments.
- For use indoors.
- Plug type F for connection to the 230 Volt mains power supply. Order a suitable connecting cable No. 928640 as necessary to suit other sockets.
Reasonably foreseeable misuse- If the LED lighting strip is 570 mm long, do not connect more than 9 LED lamps to the switched-mode power supply unit.
- If the LED lighting strip is 870 mm long, do not connect more than 6 LED lamps to the switched-mode power supply unit.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not make any unauthorised changes or modifications to it.
- Do not connect any other components to the switched-mode power supply unit.
- Not for use under tropical climatic conditions.
- Not for use if the switched-mode power supply unit, LED lamps or cable are damaged.
- Do not crush the cable or expose it to damage by sharp edges.
- Do not place any objects on it, nor walk on it.
Intended use- LED lighting for installation in GridLine sliding-door cabinets underneath storage shelves and underneath the tops of cabinets.
- An optional switch available for installation; this switches the lighting on when the cabinet is opened.
- The LEDs are not replaceable.
- For work in industrial environments.
- For use indoors.
- Plug type F for connection to the 230 Volt mains power supply. Order a suitable connecting cable No. 928640 as necessary to suit other sockets.
Reasonably foreseeable misuse- If the LED lighting strip is 570 mm long, do not connect more than 9 LED lamps to the switched-mode power supply unit.
- If the LED lighting strip is 870 mm long, do not connect more than 6 LED lamps to the switched-mode power supply unit.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not make any unauthorised changes or modifications to it.
- Do not connect any other components to the switched-mode power supply unit.
- Not for use under tropical climatic conditions.
- Not for use if the switched-mode power supply unit, LED lamps or cable are damaged.
- Do not crush the cable or expose it to damage by sharp edges.
- Do not place any objects on it, nor walk on it.
Intended use- LED lighting for installation in GridLine sliding-door cabinets underneath storage shelves and underneath the tops of cabinets.
- An optional switch available for installation; this switches the lighting on when the cabinet is opened.
- The LEDs are not replaceable.
- For work in industrial environments.
- For use indoors.
- Plug type F for connection to the 230 Volt mains power supply. Order a suitable connecting cable No. 928640 as necessary to suit other sockets.
Reasonably foreseeable misuse- If the LED lighting strip is 570 mm long, do not connect more than 9 LED lamps to the switched-mode power supply unit.
- If the LED lighting strip is 870 mm long, do not connect more than 6 LED lamps to the switched-mode power supply unit.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not make any unauthorised changes or modifications to it.
- Do not connect any other components to the switched-mode power supply unit.
- Not for use under tropical climatic conditions.
- Not for use if the switched-mode power supply unit, LED lamps or cable are damaged.
- Do not crush the cable or expose it to damage by sharp edges.
- Do not place any objects on it, nor walk on it.