{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
“Rock Turtle” service tool case of HDPE wheeled H
Article no.: 692927 H
Article code:
Click to enlarge image
Click to enlarge image
Extendable telescopic handle with push−button extension/retraction.
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Material: HDPE
- Type of tool storage: Shaft pockets
- Case load capacity: 40
- Characteristics case: suitable for air travel
Product details
Technical Data
| Material | HDPE | |
| Type of tool storage | Shaft pockets | |
| Case load capacity | 40 kg | |
| Characteristics case | suitable for air travel | |
| Internal dimension length | 470 mm | |
| Internal dimension width | 390 mm | |
| Internal dimension height | 320 mm | |
| Weight | 8,5 kg | |
| Type of product | Tool transport system |
Identification numbers & Classifications
| Article number | 692927 H | |
| EAN / GTIN | 8024482178332 | |
| Manufacturer number | 4216.B |
Description
Version:
TSA locks: When travelling to the USA these locks can be opened for searching and relocked by the US “Transportation Security Administration” (TSA) using a master key. Forcible opening of the case (irreparably damaging the locks) for searching can thus be avoided.
Extremely tough and impact-resistant HDPE case trays with aluminium frames, reinforced edges and 2 TSA locks (No. 692918).
Internal fittings with stitched shaft pockets:
1 base tray, including tool board with 18 shaft pockets as cover (No. 692908 size 2). 1 dimpled foam inlay in the base tray. 1 tool board with 24 shaft pockets, 12 rubber straps and 1 pocket for small parts on the front and back (No. 692908 size 1). 1 document pocket and 2 small parts containers in the cover.
Extremely tough and impact-resistant HDPE case trays with aluminium frames, reinforced edges and 2 TSA locks (No. 692918).
Internal fittings with stitched shaft pockets:
1 base tray, including tool board with 18 shaft pockets as cover (No. 692908 size 2). 1 dimpled foam inlay in the base tray. 1 tool board with 24 shaft pockets, 12 rubber straps and 1 pocket for small parts on the front and back (No. 692908 size 1). 1 document pocket and 2 small parts containers in the cover.
Horizontal alignment of the case. 2 ball bearing mounted wheels (⌀ 100 mm). Case with handle.
Application:
Tool case for frequent fliers.