{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Electronic torque wrench with electric drive, maximum torque: 203N·m
Article no.: 655305 203
Copy
Article code:
Copy
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- suitable battery - supplier / battery type / voltage: Milwaukee type B 12 V
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±2; ±3
- App link: OneKey
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| suitable battery - supplier / battery type / voltage | Milwaukee type B 12 V | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±2 %; ±3 % | |
| App link | OneKey | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 597 mm | |
| Torque range | 16,9 Nm - 203,4 Nm | |
| Torque range | 12,5 lbfft - 150 lbfft | |
| Torque range | 150 lbfin - 1.800 lbfin | |
| Resolution | 0,1 Nm | |
| Weight | 2.600 g | |
| Square drive | 1/2 in | |
| Display | digital | |
| Release signalling | acoustic; haptisk; haptisk | |
| Trigger principle | Vibration motor | |
| Power supply | Rechargeable battery-powered | |
| Number of rechargeable batteries contained | 1 | |
| Type of rechargeable battery | Lithium-ion | |
| Battery capacity | 2 Ah | |
| Nominal voltage | 12 V | |
| Motor design | Fuel™ | |
| No load speed | 0 min-1 - 100 min-1 | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | electronic | |
| Data can be recorded | no | |
| Setting the trigger value | digital, adjustable | |
| Feedback | acoustic signal; udløsning; visning | |
| Reversible reading | Nm; lbfin; lbfft; kgf-cm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Type of product | Torque Wrench |
Identification & Classification
| Article number |
655305 203
Copy |
|
| EAN / GTIN |
4058546229153
Copy |
|
| Manufacturer number |
4933464970
Copy |
|
| Manufacturer/responsible person | Techtronic Industries Central Europe GmbH, Walder Straße 53, 40724 HILDEN, Deutschland, www.milwaukeetool.de |
Description
Version:
- The electric drive can be used to run the screw forward to the point where torque is applied. The screw is then tightened manually to the set torque. Setting and operation directly at the torque wrench.
- Quick reporting of the torque via ONE-KEY™ for generation of reports.
- LCD display with strong colours and quick response times. Feedback on status and display of relevant information.
- Warning signals can be optionally set as tactile (vibration), visual (LEDs and display) and acoustic or combinations of these. The early warning point can be entered individually.
- Up to 28,000 measured values can be saved on the torque wrench.
- With calibration reminders. After a certain number of duty cycles and elapsed time.
Units of measure: Nm, ft·lbs, in·lbs, kg·cm.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2%, anticlockwise ± 3%.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Supplied with 12 V / 2.0 Ah Red Li-ion battery, C12C charger and sturdy plastic case.
Note:
See No. 073814ff and No. 073840 for suitable batteries and chargers. Recalibration is performed by the manufacturer.