{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Electronic torque wrench analyser &ProTest& 1500 Nm
Article no.: 654460 1500
Article code:
- Direction of tightening: Right-hand tightening
- Interface: RS232C interface
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| Direction of tightening | Right-hand tightening | |
| Interface | RS232C interface | |
| Test certificate | Manufacturer’s test certificate | |
| Type of product | Torque testing device |
Identification numbers & Classifications
| Article number | 654460 1500 | |
| EAN / GTIN | 5060922231314 | |
| Manufacturer number | 43220 |
Description
Version:
- Sturdy cast aluminium body.
- Large-format LCD display.
- Easy to use − pictogram keypad for direct choice of the test procedure etc.
- User-specific input of target torque with upper and lower tolerances; acoustic and visual signal (3 LEDs) on reaching/exceeding the target torque.
- 3 user modes: Following, inflection point detection, and peak value display.
Advantage:
- Checking to DIN EN ISO 6789; only the target value has to be put in − the torque analyser does the rest.
- 11 display languages.
- Testing in horizontal and vertical position.
- Display and measured value sensor can be separated.
Application:
For setting and calibrating torque tools.
Supplied with:
Measured value sensor, display unit, mains adapter, RS-232C connecting cable to PC or printer, 2 securing screws, and square drive adapter all in a sturdy case, including UKAS calibration certificate, right-hand.
Note:
Wall bracket under No. 654462.