{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre for interchangeable heads 3
Article no.: 321265 3
Article code:
Product details
Technical Data
| Morse taper | MT3 | |
| maximum radial run-out | 0,005 mm | |
| maximum speed | 12.000 min-1 | |
| for workpiece weight | 400 kg | |
| Length 1 | 56 mm | |
| L2 | 10 mm | |
| External ⌀ D1 | 12 mm | |
| Shank ⌀ D2 | 25 mm | |
| suitable for colour code | K12 | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 321265 3 | |
| EAN / GTIN | 4045197774446 | |
| Manufacturer number | 321265 3 |
Description
Version:
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Optional extras:
Note:
Changing the inserts in the key surfaces by counter-rotation.
Draw-off nut for NC machines to remove tip from tailstock sleeve.
Draw-off nut for NC machines to remove tip from tailstock sleeve.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Revolving lathe centre for interchangeable heads 3
on request
In stock
9 pieces in stock
1.124,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
476,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
874,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 400 | 1.000 | 400 |
| Body ⌀ D | 30 | 60 | |
| maximum speed | 12.000 | 5.000 | 4.300 |
| maximum radial run-out | 0,005 | 0,005 | 0,005 |
| Morse taper | MT3 | MT3 | MT3 |
| Reach B | 68 | 95 | |
| Type of product | Centring drill | Centring drill | Centring drill |