{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre 60° 2
Article no.: 320660 2
Article code:
Product details
Technical Data
| Morse taper | MT2 | |
| Body ⌀ D | 43 mm | |
| Reach B | 65 mm | |
| largest centre point ⌀ 60° A | 20 mm | |
| maximum radial run-out | 0,005 mm | |
| for workpiece weight | 200 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320660 2 | |
| EAN / GTIN | 4019208014388 | |
| Manufacturer number | 043115 |
Description
Version:
- Body and live centre hardened.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Revolving lathe centre 60° 2
on request
In stock
5 pieces in stock
312,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
208,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3 pieces in stock
261,05 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 200 kg | 200 kg | 200 kg |
| Body ⌀ D | 43 mm | 32 mm | 45 mm |
| maximum radial run-out | 0,005 mm | 0,005 mm | 0,005 mm |
| Morse taper | MT2 | MT2 | MT2 |
| Reach B | 65 mm | 64 mm | 76 mm |
| largest centre point ⌀ 60° A | 20 mm | 15 mm | 20 mm |
| Type of product | Centring drill | Centring drill | Centring drill |