{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
TCMT 16T304, Grade: HB7120-1
Article no.: 260956 HB7120-1
Article code:
Product details
Technical Data
| ISO code indexable insert | TCMT 16T304 | |
| Corner radius | 0,4 mm | |
| Grade | HB7120-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | continuous | |
| Chip breaker | VS | |
| Cutting depth ap | 0,2 mm - 1,5 mm | |
| Feed f | 0,1 mm/rev. - 0,3 mm/rev. | |
| Cutting speed vc main application | 90 m/min - 290 m/min | |
| Number of changes/inserts | 3 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 260956 HB7120-1 | |
| EAN / GTIN | 4045197818720 | |
| Manufacturer number | 260956 HB7120-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
TCMT 16T304, Grade: HB7120-1
on request
In stock
187 pieces in stock
13,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
154 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
276 pieces in stock
10,28 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
252 pieces in stock
7,94 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
765 pieces in stock
13,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
761 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner radius | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm |
| ISO code indexable insert | TCMT 16T304 | TCMT 110204 | TCMT 16T304 | TCMT 110204 | TCMT 16T304 | TCMT 110204 |
| Finishing/roughing assignment | Finishing | Finishing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing | Finishing |
| Cutting conditions | continuous | continuous | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm | 0,1 mm - 1 mm | 0,1 mm - 1 mm | 0,2 mm - 1,5 mm | 0,2 mm - 1,5 mm |
| Feed f | 0,1 mm/rev. - 0,3 mm/rev. | 0,1 mm/rev. - 0,3 mm/rev. | 0,05 mm/rev. - 0,2 mm/rev. | 0,05 mm/rev. - 0,2 mm/rev. | 0,1 mm/rev. - 0,3 mm/rev. | 0,1 mm/rev. - 0,3 mm/rev. |
| Main application | M | M | M | M | M | M |