{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
SCMT 120408, Grade: HBT130
Article no.: 260795 HBT130
Article code:
Product details
Technical Data
| ISO code indexable insert | SCMT 120408 | |
| Corner radius | 0,8 mm | |
| Grade | HBT130 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | MM | |
| Cutting depth ap | 0,3 mm - 2,5 mm | |
| Feed f | 0,05 mm/rev. - 0,35 mm/rev. | |
| Cutting speed vc main application | 50 m/min - 200 m/min | |
| Coating | TiCN | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 260795 HBT130 | |
| EAN / GTIN | 4062406257446 | |
| Manufacturer number | 260795 HBT130 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
SCMT 120408, Grade: HBT130
on request
In stock
804 pieces in stock
10,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
16,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
421 pieces in stock
16,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
761 pieces in stock
13,46 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Semi-roughing | Finishing | Finishing |
| Tool material | Carbide | Carbide | Carbide | Carbide |
| Cutting conditions | slightly interrupted | continuous | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0,3 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm |
| Grade | HBT130 | HB7120-1 | HB7130-2 | HB7130-2 |
| Main application | M | M | M | M |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |