{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | WNMG 080412 | |
Corner radius | 1,2 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS (brass) | |
Tolerance | M | |
Cutting depth ap | 0,8 mm - 4 mm | |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 252116 CA6525 | |
EAN / GTIN | 4960664472345 | |
Manufacturer number | TJV08633 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
WNMG 080412 CA6525
on request
In stock
302 pieces in stock
17,89 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
685 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
574 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
558 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2.372 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1.771 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
|
ISO code indexable insert | WNMG 080412 | WNMG 080404 | WNMG 080408 | WNMG 080404 | WNMG 080408 | WNMG 080408 |
Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing |
Cutting conditions | slightly interrupted | continuous | continuous | slightly interrupted | slightly interrupted | slightly interrupted |
Grade | CA6525 | HB7120-1 | HB7120-1 | HBT130 | HBT130 | HB7130-2 |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | 0,1 mm/rev. - 0,5 mm/rev. | 0,1 mm/rev. - 0,5 mm/rev. | 0,12 mm/rev. - 0,45 mm/rev. | 0,12 mm/rev. - 0,45 mm/rev. | 0,1 mm/rev. - 0,5 mm/rev. |
Cutting speed vc main application | 60 m/min - 220 m/min | 80 m/min - 260 m/min | 80 m/min - 260 m/min | 50 m/min - 200 m/min | 50 m/min - 200 m/min | 70 m/min - 240 m/min |
Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |