{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 251586 CA125P
TNMG 220404, Grade: CA025P
Article no.: 251586 CA025P
Article code:
Product details
Technical Data
| ISO code indexable insert | TNMG 220404 | |
| Corner radius | 0,4 mm | |
| Grade | CA025P | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | PS | |
| Cutting depth ap | 1 mm - 4,5 mm | |
| Feed f | 0,15 mm/rev. - 0,6 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 420 m/min | |
| Coating | CVD | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 251586 CA025P | |
| Manufacturer number | TMH00277 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
TNMG 220404, Grade: CA025P |
on request
In stock
533 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
504 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
621 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
501 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 6 | 6 | 6 | 6 | 6 |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning |
| Cutting conditions | slightly interrupted | slightly interrupted | continuous | heavily interrupted | slightly interrupted |
| Cutting depth ap | 1 mm - 4,5 mm | 0,5 mm - 5 mm | 0,5 mm - 5 mm | 0,5 mm - 5 mm | 0,8 mm - 5 mm |
| Chip breaker | PS | SM | SM | SM | PM |
| Feed f | 0,15 mm/rev. - 0,6 mm/rev. | 0,2 mm/rev. - 0,5 mm/rev. | 0,2 mm/rev. - 0,5 mm/rev. | 0,2 mm/rev. - 0,5 mm/rev. | 0,1 mm/rev. - 0,45 mm/rev. |
| Cutting speed vc main application | 70 m/min - 420 m/min | 120 m/min - 350 m/min | 120 m/min - 440 m/min | 100 m/min - 320 m/min | 100 m/min - 280 m/min |