{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | TNMG 160404 | |
Corner radius | 0,4 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS | |
Cutting depth ap | 0,8 mm - 4 mm | |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 251582 CA6525 | |
EAN / GTIN | 4960664472062 | |
Manufacturer number | TJV06281 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() TNMG 160404 CA6525
on request
In stock
205 pieces in stock
15,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
526 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
256 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
316 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of changes/inserts | 6 | 6 | 6 | 6 |
Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Finishing | Finishing |
Tool material | Carbide | Carbide | Carbide | Carbide |
Grade | CA6525 | HBT130 | HB7130-2 | HB7130-2 |
Chip breaker | MS | MM | VM | VM |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | 0,12 mm/rev. - 0,45 mm/rev. | 0,2 mm/rev. - 0,5 mm/rev. | 0,2 mm/rev. - 0,5 mm/rev. |
Main application | M | M | M | M |