{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
TNMG 160404, Grade: HB7010-1
Article no.: 251432 HB7010-1
Article code:
Product details
Technical Data
| ISO code indexable insert | TNMG 160404 | |
| Corner radius | 0,4 mm | |
| Grade | HB7010-1 | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | continuous | |
| Chip breaker | SS | |
| Cutting depth ap | 0,3 mm - 2 mm | |
| Feed f | 0,1 mm/rev. - 0,4 mm/rev. | |
| Cutting speed vc main application | 150 m/min - 500 m/min | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 251432 HB7010-1 | |
| EAN / GTIN | 4045197780195 | |
| Manufacturer number | 251432 HB7010-1 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
TNMG 160404, Grade: HB7010-1
on request
In stock
347 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
857 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
332 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
324 pieces in stock
16,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1.409 pieces in stock
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 6 | 6 | 6 | 6 | 6 |
| ISO code indexable insert | TNMG 160404 | TNMG 160404 | TNMG 160404 | TNMG 160404 | TNMG 160404 |
| Finishing/roughing assignment | Finishing | Finishing | Finishing | Finishing | Finishing |
| Cutting conditions | continuous | slightly interrupted | heavily interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,3 mm - 2 mm | 0,5 mm - 2 mm |
| Chip breaker | SS | SS | SS | WSS | PF |
| Feed f | 0,1 mm/rev. - 0,4 mm/rev. | 0,1 mm/rev. - 0,4 mm/rev. | 0,1 mm/rev. - 0,4 mm/rev. | 0,15 mm/rev. - 0,35 mm/rev. | 0,1 mm/rev. - 0,4 mm/rev. |