{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 150612, Grade: HB7010-1
Article no.: 250864 HB7010-1
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 150612 | |
| Corner radius | 1,2 mm | |
| Grade | HB7010-1 | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | continuous | |
| Chip breaker | SG | |
| Cutting depth ap | 1,5 mm - 6 mm | |
| Feed f | 0,25 mm/rev. - 0,6 mm/rev. | |
| Cutting speed vc main application | 100 m/min - 375 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250864 HB7010-1 | |
| EAN / GTIN | 4045197779922 | |
| Manufacturer number | 250864 HB7010-1 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
DNMG 150612, Grade: HB7010-1
on request
In stock
141 pieces in stock
19,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
516 pieces in stock
19,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
460 pieces in stock
19,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
613 pieces in stock
14,77 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 4 | 4 | 4 | 4 |
| Corner radius | 1,2 mm | 1,2 mm | 1,2 mm | 1,2 mm |
| Finishing/roughing assignment | Roughing | Roughing | Roughing | Roughing |
| Cutting conditions | continuous | slightly interrupted | heavily interrupted | slightly interrupted |
| Cutting depth ap | 1,5 mm - 6 mm | 1,5 mm - 6 mm | 1,5 mm - 6 mm | 1,8 mm - 6 mm |
| Chip breaker | SG | SG | SG | PR |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |