{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | CNMG 120412 | |
Corner radius | 1,2 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS | |
Cutting depth ap | 0,7 mm - 4 mm | |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 4 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 250214 CA6525 | |
EAN / GTIN | 4960664471362 | |
Manufacturer number | TJV00923 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
CNMG 120412 CA6525
on request
In stock
280 pieces in stock
17,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
712 pieces in stock
from
1
Pieces
11,11 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
9,26 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1.687 pieces in stock
from
1
Pieces
10,92 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
9,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
320 pieces in stock
11,11 €
5,51 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
932 pieces in stock
6,77 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1.986 pieces in stock
11,11 €
6,45 €
plus VAT at the current rate
Prices plus delivery costs
|
|
ISO code indexable insert | CNMG 120412 | CNMG 120412 | CNMG 120412 | CNMA 120412 | CNMG 120412 | CNMG 120412 |
Finishing/roughing assignment | Semi-roughing | Schrupp-Schlichten | Schrupp-Schlichten | Schrupp-Schlichten | Schrupp-Schlichten | Schrupp-Schlichten |
Cutting conditions | slightly interrupted | kontinuierlich | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen |
Grade | CA6525 | HB7120-1 | HB7140-1 | HB7210-1 | HBT130 | HB7130-2 |
Feed f | 0,1 mm/rev. - 0,35 mm/rev. | 0,1 mm/U - 0,4 mm/U | 0,1 mm/U - 0,4 mm/U | 0,3 mm/U - 0,7 mm/U | 0,12 mm/U - 0,45 mm/U | 0,1 mm/U - 0,4 mm/U |
Main application | M | M | M | K | M | M |
Type of product | Indexable insert for turning | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen |