{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron™ indexable drill ABS shank 5×D 37,5 mm
Article no.: 236604 37,5
Article code:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ABS
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 37.5 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ABS | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 190 mm | |
| Overhang LA | 232 mm | |
| ABS® shank ⌀ Ds | 63 mm | |
| ISO code indexable insert | SOGX 120408 42-... | |
| Pack of insert screws | 239652 20IP (6.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236604 37,5 | |
| EAN / GTIN | 4047109201101 | |
| Manufacturer number | U45 63750 |
Description
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
KUB Pentron™ indexable drill ABS shank 5×D 37,5 mm
on request
Unknown
0 pieces in stock
994,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
811,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Use for drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling |
| ISO code indexable insert | SOGX 120408 42-... | SOGX 130511 |
| Nominal ⌀ D | 37.5 | 37.5 |
| Shank | ABS | ISO 9766 |
| Pack of insert screws | 239652 20IP (6.3 Nm) | 239700 20IP (6.3 Nm) |
| Reach L1 | 190 | 190 |
| Series | KUB Pentron® | Power Drill |