{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Quatron® indexable drill combination shank 2×D 17 mm
Article no.: 235500 17
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Find similar products here:
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 17 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 34 mm | |
| Overhang LA | 58 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| ISO code indexable insert | SOEX 050204 13-.. | |
| Pack of insert screws | 239652 6IP1 (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 108 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235500 17 | |
| EAN / GTIN | 4047109047129 | |
| Manufacturer number | U10 11700 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
KUB Quatron® indexable drill combination shank 2×D 17 mm |
on request
In stock
16 pieces in stock
317,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
404,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
330,05 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 1 | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D | 2×D |
| ISO code indexable insert | SOEX 050204 13-.. | WOEX 030204 | SOGX 060305 | SOMT06T205 / XOMT06T204 |
| Shank length Ls | 50 mm | 50 mm | 50 mm | 56 mm |
| Pack of insert screws | 239652 6IP1 (0.6 Nm) | 239700 6IP (0.6 Nm) | 239700 6IP2 (0.6 Nm) | 232980 2 (TX7;0.8Nm) |
| Reach L1 | 34 mm | 34 mm | 34 mm | 37 mm |
| Overhang LA | 58 mm | 58 mm | 51 mm | 53 mm |