{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable drill combination shank 4×D 14 mm GARANT
Article no.: 232310 14
Article code:
- Drill depth for indexable insert drill up to: 4×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Nominal ⌀ D | 14 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Reach L1 | 56 mm | |
| Overhang LA | 80 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| Maximum adjustment limit Vmax | 0,5 mm | |
| ISO code indexable insert | WOEX 030204 | |
| Pack of insert screws | 239700 6IP (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 130 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 232310 14 | |
| EAN / GTIN | 4045197551276 | |
| Manufacturer number | 232310 14 |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 030204.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable drill combination shank 4×D 14 mm GARANT
on request
In stock
18 pieces in stock
424,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
503,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
363,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
623,30 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Drill depth for indexable insert drill up to | 4×D | 4×D | 4×D | 5×D |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited drilling with oblique exit; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | limited drilling with oblique exit; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited cross-drilling |
| ISO code indexable insert | WOEX 030204 | SOGX 050204 | SOMT05T204 / XOMT05T204 | SOGX 050204 |
| Nominal ⌀ D | 14 | 14 | 14 | 14 |
| Pack of insert screws | 239700 6IP (0.6 Nm) | 239700 5IP (0.38 Nm) | 232980 1 (TX6;0.4Nm) | 239700 5IP (0.38 Nm) |
| Reach L1 | 56 mm | 56 mm | 59 mm | 70 mm |
| Overhang LA | 80 mm | 69 mm | 74 mm | 97 mm |