{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ D | 28 | |
Drill depth for indexable insert drill up to | 2×D | |
Shank | DIN 6535 HE, DIN 6595 | |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
Through-coolant | yes | |
Machining strategy | MTC | |
Reach L1 | 56 mm | |
Overhang LA | 80 mm | |
Shank ⌀ Ds | 32 mm | |
Shank length Ls | 60 mm | |
Maximum adjustment limit Vmax | 1,5 mm | |
ISO code indexable insert | WOEX 05T304 | |
Pack of insert screws | 239700 8IP (1.3 Nm) | |
Number of cutting edges Z | 1 | |
Overall length L | 140 mm | |
Type of product | Indexable drill |
Article number | 232298 28 | |
EAN / GTIN | 4045197677013 | |
Manufacturer number | 232298 28 |
This article |
Recommendations |
||
---|---|---|---|
Indexable drill combination shank 2×D 28 mm GARANT
on request
In stock
8 pieces in stock
347,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
469,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
384,10 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling |
Nominal ⌀ D | 28 | 28 | 28 |
Shank ⌀ Ds | 32 mm | 32 mm | 32 mm |
Pack of insert screws | 239700 8IP (1.3 Nm) | 239700 10IP (2.8 Nm) | 232980 4 (TX9;1.2Nm) |
Reach L1 | 56 mm | 56 mm | 59 mm |
Overhang LA | 80 mm | 78 mm | 83 mm |