{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ D | 14 | |
Drill depth for indexable insert drill up to | 2×D | |
Shank | DIN 6535 HE, DIN 6595 | |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
Through-coolant | yes | |
Machining strategy | MTC | |
Reach L1 | 28 mm | |
Overhang LA | 52 mm | |
Shank ⌀ Ds | 20 mm | |
Shank length Ls | 50 mm | |
Maximum adjustment limit Vmax | 0,5 mm | |
ISO code indexable insert | WOEX 030204 | |
Pack of insert screws | 239700 6IP (0.6 Nm) | |
Number of cutting edges Z | 1 | |
Overall length L | 102 mm | |
Type of product | Indexable drill |
Article number | 232298 14 | |
EAN / GTIN | 4045197676368 | |
Manufacturer number | 232298 14 |
This article |
Recommendations |
||
---|---|---|---|
Indexable drill combination shank 2×D 14 mm GARANT
on request
In stock
7 pieces in stock
317,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
386,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
315,10 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 1 | 1 | 1 |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling |
Shank | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm |
Pack of insert screws | 239700 6IP (0.6 Nm) | 239700 5IP (0.38 Nm) | 232980 1 (TX6;0.4Nm) |
Reach L1 | 28 mm | 28 mm | 31 mm |
Type of product | Indexable drill | Indexable drill | Indexable drill |