{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill cutter insert m7, HB3040, ⌀ D: 14mm
Article no.: 231645 14
Article code:
- Tool material: Carbide
- Point angle: 160
- Use for drilling: Drilling through a stack
- Semi-Standard: yes
Product details
Technical Data
| Series | HiPer-Drill | |
| ⌀ D | 14 mm | |
| Grade | HB3040 | |
| Tool material | Carbide | |
| Point angle | 160 degrees | |
| for base body size | 14 | |
| Feed f in steel < 750 N/mm2 | 0.26 mm/rev. | |
| Use for drilling | Drilling through a stack | |
| Semi-Standard | yes | |
| Number of cutting edges Z | 2 | |
| Number of changes/inserts | 1 | |
| Coating | TiAlN | |
| Type of product | Cutter insert for boring |
Identification numbers & Classifications
| Article number | 231645 14 | |
| EAN / GTIN | 4062406162306 | |
| Manufacturer number | 231645 14 |
Application Table
P
140
P
120
P
100
K
80
Description
Version:
Vee ground cutter inserts for precise positioning and stable seating.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Note:
Cutting data applies for the base body 5×D.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.