{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
90° end mill MEC11T with threaded shank 20/2 mm
Article no.: 227315 20/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 30 mm | |
| Mounting thread M | M10 | |
| ⌀ D3 | 14 mm | |
| Circular interpolation milling ⌀ Dmin | 34 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 0,88 degrees | |
| Ramping length L for αmax | 13 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227315 20/2 | |
| EAN / GTIN | 4960664672905 | |
| Manufacturer number | THN03506 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
90° end mill MEC11T with threaded shank 20/2 mm
on request
In stock
1 pieces in stock
289,57 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
189,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
323,15 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling; Ramping; End milling | End milling | Corner milling |
| Overall length Ltot | 30 mm | 30 mm | 28 mm |
| suitable indexable insert | BD.. 11T3 | SO.. 0836.. | LO.U0904.. |
| Shank type | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill | End / face mill |