{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Number of cutting edges Z | 3 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 6 mm | |
Overhang L1 | 20 mm | |
Overall length Ltot | 68 mm | |
Shank ⌀ Ds h6 | 16 mm | |
⌀ D3 | 13 mm | |
Circular interpolation milling ⌀ Dmin | 29 mm | |
Circular interpolation milling ⌀ Dmax | 30 mm | |
Ramping angle αmax | 0,95 degrees | |
Ramping length L for αmax | 12 mm | |
suitable indexable insert | BD.. 0703 | |
Insert screw | 229707 (T6; 0.45 Nm) | |
Type of product | End / face mill |
Article number | 227105 16/3 | |
EAN / GTIN | 4960664472659 | |
Manufacturer number | THN63270 |
This article |
Recommendations |
||
---|---|---|---|
90° end mill MECX Weldon shank 16/3 mm
on request
In stock
4 pieces in stock
322,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
368,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
349,60 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 | 3 |
Overall length Ltot | 68 mm | 75 mm | 90 mm |
suitable indexable insert | BD.. 0703 | AP.. 0602.. | AP.. 0602.. |
Shank type | Weldon shank | Weldon shank | Plain shank |
Shank ⌀ Ds h6 | 16 mm | 16 mm | 16 mm |
Circular interpolation milling ⌀ Dmax | 30 mm | 30 mm | 30 mm |
Ramping angle αmax | 0,95 degrees | 0,89 degrees | 0,89 degrees |