{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 16/2L mm
Article no.: 221950 16/2L
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 9 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overhang L1 | 50 mm | |
| Overall length Ltot | 150 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 25 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Ramping angle αmax | 2,35 degrees | |
| Ramping length L for αmax | 7,3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221950 16/2L | |
| EAN / GTIN | 4960664741427 | |
| Manufacturer number | THN07652 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 16/2L mm
on request
In stock
21 pieces in stock
279,37 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
247,25 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Setting angle κ | 15 | 20 |
| suitable indexable insert | LOGU 0303.. | ANGX10T308ZE.R |
| Cutting edge ⌀ DC | 16 | 16 |
| Machining strategy | HPC | HPC |
| Circular interpolation milling ⌀ Dmax | 30 | 30 |
| Ramping length L for αmax | 7,3 | 8,4 |
| Type of product | Copy mill | Copy mill |