{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Milling insert 60° HB 7720 1,5 mm GARANT
Article no.: 217285 1,5
Article code:
- Thread type: M; M-LH; MF; MF-LH
- Flank angle: 60
- Cutting direction: right-hand and left-hand
Product details
Technical Data
| Thread pitch | 1,5 mm | |
| Grade | HB7720 | |
| Tool material | Carbide | |
| Thread type | M; M-LH; MF; MF-LH | |
| Flank angle | 60 degrees | |
| Insert geometry | Full profile | |
| Application | Internal | |
| External ⌀ D | 26 mm | |
| Depth t | 0.864 mm | |
| for threads ≥ | M30×1.5 | |
| Type | P26 | |
| Number of cutting edges Z | 6 | |
| Number of clamping slots | 6 | |
| Cutting direction | right-hand and left-hand | |
| Type of product | Cutter insert for circular milling |
Identification numbers & Classifications
| Article number | 217285 1,5 | |
| EAN / GTIN | 4045197216793 | |
| Manufacturer number | 217285 1,5 |
Application Table
N
500
N
400
N
250
P
250
P
180
P
120
P
120
P
100
H
60
H
45
H
35
H
30
M
120
M
120
S
80
K
180
Description
Note:
Corrected profile threading inserts eliminate the need to program a correction to the diameter. Therefore use these inserts only for the specified thread sizes.
When using the circular milling cutter No. 217252 size 18L and 18XL, the partial profile insert No. 217281 size 1−4 can be used only up to pitch 3.0.
When using the circular milling cutter No. 217252 size 18L and 18XL, the partial profile insert No. 217281 size 1−4 can be used only up to pitch 3.0.