{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | FeedKing | |
Cutting edge ⌀ DC | 63 mm | |
Number of cutting edges Z | 5 | |
Shank type | with bore | |
Milling application | Circular milling; Ramping; Plunging | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Machining strategy | HPC | |
Tool exchange | PowerCard | |
⌀ D3 | 42 mm | |
maximum cutting depth ap max | 1,8 mm | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 27 mm | |
Circular interpolation milling ⌀ Dmin | 105 mm | |
Circular interpolation milling ⌀ Dmax | 124 mm | |
Circular interpolation milling ap | 1,85 mm | |
Ramping angle αmax | 0,41 degrees | |
Ramping length L for αmax | 41,5 mm | |
suitable indexable insert | XD.. 120408 | |
Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
Setting angle κ | 12 degrees | |
Fz Helix | 0,7 | |
Type of product | Copy mill |
Article number | 212910 63/5 | |
EAN / GTIN | 4045197321039 | |
Manufacturer number | 212910 63/5 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Feedking high feed rate indexable end mill with bore 63/5 mm GARANT
on request
In stock
28 pieces in stock
457,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
431,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
501,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Mounting bore ⌀ | 27 mm | 27 mm | 27 mm |
Setting angle κ | 12 degrees | 11 degrees | 16 degrees |
Milling application | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging | Plunging; Ramping; Plunging |
Overall length Ltot | 50 mm | 50 mm | 50 mm |
Circular interpolation milling ⌀ Dmax | 124 mm | 124 mm | 124 mm |
Ramping angle αmax | 0,41 degrees | 1,06 degrees | 1,04 degrees |
Ramping length L for αmax | 41,5 mm | 43,34 mm | 44,07 mm |