{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Finishing mill, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
Article no.: 212538 25/3
Article code:
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Machining strategy: HPC
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D1 h6 | 12,5 mm | |
| ⌀ D2 | 21 mm | |
| maximum cutting depth ap max | 3 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| suitable indexable insert | CPHX 09T3.. | |
| Pack of insert screws | 219799 4 (15IP; 3.8 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212538 25/3 | |
| EAN / GTIN | 4062406098766 | |
| Manufacturer number | 212538 25/3 |
Description
Version:
Precision finish milling for extremely efficient en pre-finish machining and finish machining. Due to the revised wiper geometry, suitable for outstanding surface quality in ground finish standard. Extreme time saving available due to a large line skip and a high feed rate per tooth.
Application:
Typical tool for tool and die manufacturing.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Finishing mill, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
42 pieces in stock
271,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
221,38 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
324,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
217,35 €
plus VAT at the current rate
Prices plus delivery costs
|
Copy and face mills, indexed, with threaded shank, ⌀ D / number of effective cutting edges Z: 25/3mm
on request
In stock
22 pieces in stock
259,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 | 3 | 3 | |
| Milling application | End milling; Circular milling; Ramping | Circular milling; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping | Ramping; Ramping |
| Overall length Ltot | 35 mm | 35 mm | 35 mm | 35 mm | |
| Through-coolant | yes | yes | yes | yes | |
| suitable indexable insert | CPHX 09T3.. | RD..1003 | XD.. 070308 | RPK.10T3M0T | |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | |
| Type of product | Copy mill | Copy mill | Copy mill | Copy mill | Copy mill |