{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Copy mill (RD..16) with bore 100/7 mm GARANT
Article no.: 212165 100/7
Article code:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 84 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 184 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 3,5 mm | |
| Ramping angle αmax | 0,8 degrees | |
| Ramping length L for αmax | 79,92 mm | |
| suitable indexable insert | RD..1604 | |
| Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
| Set of retaining washers | 219955 | |
| Setting angle κ | 15 – 30 degrees | |
| Fz Helix | 0,7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212165 100/7 | |
| EAN / GTIN | 4045197192912 | |
| Manufacturer number | 212165 100/7 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Application:
With pack of insert screws No. 219800 - for securing indexable inserts and retaining washers.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.